Water-Based to UV Ink Conversion on Flexo Presses: Anilox, Drying and Plate Compatibility

Water-Based to UV Ink Conversion on Flexo Presses: Anilox, Drying and Plate Compatibility

Pre-conversion engineering evaluation for switching a flexographic printing press from water-based ink to UV-curable ink...
Why Web Support Decides Registration: CI Flexo vs Inline Flexo for Thin Film Packaging

Why Web Support Decides Registration: CI Flexo vs Inline Flexo for Thin Film Packaging

The structural trade-off between central impression (CI) and inline flexographic press architectures when printing thin,...
Slitting Blade Selection: Shear vs. Crush vs. Razor for Film, Foil and Paper

Slitting Blade Selection: Shear vs. Crush vs. Razor for Film, Foil and Paper

How to select the appropriate slitting blade method based on substrate type, thickness, edge quality requirements and ma...
Ghosting vs Dot Gain in Flexo: Diagnosing Anilox and Impression Settings in the Right Order

Ghosting vs Dot Gain in Flexo: Diagnosing Anilox and Impression Settings in the Right Order

A field-oriented diagnostic framework that separates flexographic ghosting caused by anilox/ink delivery from dot gain c...
Run Length Decides: Flexo, Hybrid, or Digital?

Run Length Decides: Flexo, Hybrid, or Digital?

How run length and job structure influence the choice between flexographic, digital, and hybrid printing for packaging a...
Flexo Printing for Corrugated Boxes: A Pre-Purchase Checklist for Production Managers

Flexo Printing for Corrugated Boxes: A Pre-Purchase Checklist for Production Managers

Pre-purchase evaluation and specification checklist for flexographic printing equipment used in corrugated box productio...
Dry Laminator Maintenance: Coating, Drying & Pressing Guide

Dry Laminator Maintenance: Coating, Drying & Pressing Guide

Learn how to maintain coating, drying, and pressing units in a dry laminator. Practical cleaning schedules, parameter ch...
Flexo Print Defects on Corrugated Board: Causes and Fixes

Flexo Print Defects on Corrugated Board: Causes and Fixes

Registration drift, fluting, ink adhesion, and board crush are common flexo defects on corrugated board. Learn the likel...
Why Slitting Speed Matters in Roll-to-Roll Converting

Why Slitting Speed Matters in Roll-to-Roll Converting

Slitting speed affects tension, edge quality, blade wear, and roll stability. Learn how speed interacts with web tension...
5 Slitting Machine Mistakes That Ruin Your Material

5 Slitting Machine Mistakes That Ruin Your Material

Slitting machine errors can waste material and ruin roll quality. Learn 5 common pitfalls—from blade issues to tension p...
Servo-Driven vs. Gear-Driven Flexo Presses: Selection Guide

Servo-Driven vs. Gear-Driven Flexo Presses: Selection Guide

Compare servo-driven and gear-driven flexographic printing machines. Learn key selection criteria including substrate ty...
How to Handle Substrate Changes in Flexo & Slitting Lines

How to Handle Substrate Changes in Flexo & Slitting Lines

Substrate changes in flexo and slitting lines can cause tension drift, register errors, and waste. Learn the causes, key...

GET A QUOTE

+86 15382505395(Angela)

+86 15382505195(Yvonne)

GET IN TOUCH NOW
Captcha Code
We value your privacy
We use cookies to provide you with a better online experience, analyse and measure website usage, and assist in our marketing efforts.
Accept All